Is docker0 network down in my setup?

I am looking at the several commands in linux and am seeing the following:

  • ifconfig
  • ip link show docker0
  • ip route
  • networkctl | grep docker0


docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet  netmask  broadcast
        inet6 fe80::204b:6eff:fe7e:cbc9  prefixlen 64  scopeid 0x20<link>
        ether 22:4b:6e:7e:cb:c9  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ip link show docker0
4: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
    link/ether 22:4b:6e:7e:cb:c9 brd ff:ff:ff:ff:ff:ff
ip route
........(other IP routes) dev docker0 proto kernel scope link src linkdown 
networkctl | grep docker0
systemd-networkd is not running, output might be incomplete.
  4 docker0 bridge   -           unmanaged

Is my docker0 is down? if it is how can I get it up and running again?

shouldn’t this command,

docker run -it --cap-add=all --hostname debian -p 8080:8080 -p 6000:6000 -p 8888:8888/tcp -p 8888:8888/udp -p 4001:22 --dns-opt='options single-request' --sysctl net.ipv6.conf.all.disable_ipv6=1 --name Container_image image

starts using docker0 network?