There was docker swarm installed on my Ubuntu 18.04 VM. And a stack was on it with some services. After I added a new nic with (IP:10.211.108.6) to /etc/netplan/*.yaml and applied it, all the interfaces got additional inet lines. After that I lost the availability of the services. I need to remove those inet lines from the docker interfaces. So I hope I cann reach those services again. What do you suggest?
Example:
Before netplan apply
lxdbr0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.79.227.1 netmask 255.255.255.0 broadcast 0.0.0.0
inet6 fe80::216:3eff:febd:7f2d prefixlen 64 scopeid 0x20<link>
ether 00:16:3e:bd:7f:2d txqueuelen 1000 (Ethernet)
RX packets 2355397 bytes 373860862 (373.8 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 939535 bytes 268749305 (268.7 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lxdbr0-mtu: flags=195<UP,BROADCAST,RUNNING,NOARP> mtu 1500
inet6 fe80::c92:68ff:fe97:cd9 prefixlen 64 scopeid 0x20<link>
ether 0e:92:68:97:0c:d9 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 7273 bytes 509846 (509.8 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
After netplan apply
lxdbr0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.211.108.6 netmask 255.255.255.0 broadcast 10.211.108.255
inet6 fe80::216:3eff:febd:7f2d prefixlen 64 scopeid 0x20<link>
ether 00:16:3e:bd:7f:2d txqueuelen 1000 (Ethernet)
RX packets 2355667 bytes 373878568 (373.8 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 939567 bytes 268753546 (268.7 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lxdbr0-mtu: flags=195<UP,BROADCAST,RUNNING,NOARP> mtu 1500
inet 10.211.108.6 netmask 255.255.255.0 broadcast 10.211.108.255
inet6 fe80::c92:68ff:fe97:cd9 prefixlen 64 scopeid 0x20<link>
ether 0e:92:68:97:0c:d9 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 7460 bytes 518188 (518.1 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0