Docker Community Forums

Share and learn in the Docker community.

Vpnkit appcrash


(Andrewbrownemsi) #1

I just took the upgrade to the latest Docker for Windows on my Windows 10 machine, which I find myself regretting now, since I have some work I need to get done this evening.

Upon taking the upgrade, I can no longer start docker, and it repeats the following errors in my system logs:

Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program vpnkit.exe because of this error.

Program: vpnkit.exe
File:

The error value is listed in the Additional Data section.
User Action

  1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
  2. If the file still cannot be accessed and
  • It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
  • It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
  1. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
  2. If the problem persists, restore the file from a backup copy.
  3. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.

Additional Data
Error value: 00ED16AC
Disk type: 0

Faulting application name: vpnkit.exe, version: 0.0.0.0, time stamp: 0x59cb63a4
Faulting module name: vpnkit.exe, version: 0.0.0.0, time stamp: 0x59cb63a4
Exception code: 0xc000001d
Fault offset: 0x00000000005646f2
Faulting process id: 0x4550
Faulting application start time: 0x01d33be9d9367b91
Faulting application path: C:\Program Files\Docker\Docker\Resources\vpnkit.exe
Faulting module path: C:\Program Files\Docker\Docker\Resources\vpnkit.exe
Report Id: 563b035b-668e-4304-a171-a72f034888b5
Faulting package full name:
Faulting package-relative application ID:

Any ideas what might cause this?


(Nat2k5us) #2

I am experiencing the same issue - this just started today.

Did you find a solution to this issue.


(Mluvis) #3

Ran into this issue today and I got docker up and running again by replacing vpnkit.exe and libgmp-10.dll with the latest builds found here https://ci.appveyor.com/project/moby/vpnkit/build/1.0.231/artifacts

Worked for me … your mileage may vary …